Thursday, July 7, 2016

How to build a robot

Tin Can Robot.


My Purpose for this writing is to explain how to build a tin can robot step by step.

Caitlyn: Things you will need:
  • 4 body rings
  • 1 short leg
  • 1 long leg
  • 2 gripper hands
  • Straw attachments
  • 1 toy motor with gear
  • 1 Body plate
  • 1 Battery casing with cover and wires
  • 2 Moving eyes
  • 2 plastic feet
  • 1 motor/ axle
  • 1 axle with gear
  • 2 bendy straws
  • 2 metal wires
  • 2 eyes base plates
  • Screws
  • 4 bolts and nuts
  • 2 terminal caps
  • Screwdriver
  • Cooking Oil


Step 1: Undo the box very carefully. Then you can decide if you want to do the robot  standing or lying down.
Step 2:First  you get the battery pack and attach it to the body plate and then connect the wires. Step 3: Then get the body rings and slot them into the body plate.Step 4: Next you get the straws and the hands and put the hands into the straws.Then you get the metal wires and the screw and screw in the wire.Next get the eye base plates and attach them to the wire. Then you get the eyes and peel the paper of from the eye. Then stick the eyes onto the base plates. Then put the battery in the battery case and then you are done. That is how you build a Tin Can Robot.

File_000.jpeg




No comments:

Post a Comment

Thanks for your positive, thought and helpful comment on my work.